Tiling Setup dialog

The Tiling Setup dialog is opened from the Crop button on the Job tab.

Note: The configuration in this dialog becomes available if roll media or fixed sheet media is selected in the Media Setup tab of the Queue Properties dialog.

Use the following to configure tiles:
Zoom in, Zoom out
Disable all tiles
X, Y	Set the crop region according to X and Y measurements.
Width, Height	Set the crop region according to width and height.
Define tiles	By rows and columns By dimensions: Set the height and width and origin. Set origin by clicking on the image to select a position on the page from the 9x9 square that appears. Manually: When selected, use mouse to click and drag over image to set tile.
Rotate alternate columns	Rotate every other column by 180°.
Space between tiles	None: Select for no overlap lines. Tiling Overlaps: Define X and Y after selecting Top and left edges, Bottom and right edges, or All edges. Gaps: Define X and Y after selecting Top and left edges, Bottom and right edges, or All edges.
Print overlap lines	If Tiling Overlaps is selected, set the print overlap lines (none, line, ticks in crop area) and click Color to define a color for the lines (RGB or CMYK).