色の編集ダイアログ
The Edit Color dialog enables you to edit and measure colors and edit output tool paths.
一般タブ
RGB値 | スライダーを使用して値をコントロールするか数字を入力します。 |
測定 | 分光光度計(色に命名が必要)を選択します。 |
Color type | |
Reflectivity | |
Color name | |
Vendor | |
Vendor code | |
Pen |
Output Tool Paths tab
EngraveLab
RGB値 | スライダーを使用して値をコントロールするか数字を入力します。 |
測定 | 分光光度計(色に命名が必要)を選択します。 |
Pen | |
深さ | |
パス毎の深さ | |
最終パスの深さ | |
パス |
Laser L Edition
RGB値 | スライダーを使用して値をコントロールするか数字を入力します。 |
測定 | 分光光度計(色に命名が必要)を選択します。 |
マテリアル | |
モード | Note: When creating drill point tool paths, Hole mode must be assigned. |
スピード | |
パワー | |
パス | |
双方向性 | ラスター作業モードにのみ適用できる双方向性出力を選択します。有効にすると、レーザーが両方向に動きます。 |
1つのオブジェクトとして出力 | |
ギャップのスキャン | 選択された測定単位(インチまたはミリメートル)あたりの行数を設定します。 |
Ruida Edition
Note: Options depend on selected mode.
マテリアル | |
モード | Note: When creating drill point tool paths, Hole mode must be assigned. |
スピード | |
パス | |
Blower |
While: When the machine is running. Always: Always on. |
双方向性 | Bi-directional |
ギャップのスキャン |
The distance the laser moves vertically between passes. |
Hole in Center | |
Hole Interval | |
Hole Length | |
L1, L2 | |
Min Power | |
Max Power | |
Laser Through Mode | Select for multiple cuts and set Through Power. |
Through Power |
The power of the laser in Through Mode. Note: Laser Through Mode must be selected and Open Delay cannot be 0. |
Grade Width | |
Radiation Time | |
Open Delay | Delays the start of the laser. |
Close Delay | Delays when the laser stops after the cut. |