Default dialog

The Default dialog appears when creating tool paths for the first time from Tool Path Tools > [select tool path tool] and every time from Machine > Create Tool Path > [select tool path].

These tabs may not appear in this order. Use the table to configure tool paths. Options are available depending on selections.

Basic controls:

• Lock Template: Set a password to restrict template editing.
• Clear: Deselect the current template to create a new one.
• Add: Enter a new cut template.
• Change: Accept changes to the current cut template.

Default dialog

Template tab
Material Library	Opens the Material Library dialog. The Material Library lists all of the materials that can be associated with output. Set the type, thickness, and color.
Costo materiale	Select a material from the list, then click Change to accept.
Template name	Enter a name.
Filter by material	Select to filter the list by material.
Colori	Select a color.
Basic Cut tab
Tool	Select a tool from the drop-down list. Click to launch the Tools Library dialog.
Inlay	Select to enable an inlay and set the offset.
Material thickness	Set the depth, surface, and total passes. Select to enable a fixed first pass, maximum per pass, and a fixed last pass.
Direction	Set the direction as conventional or climbing.
Tool path cornering	Set the cornering as sharp corner or roll corner.
Move control	Set the feed and plunge rate, and the spindle speed and dwell time.
Flange tab
Tool	Select a tool from the drop-down list. Click to launch the Tools Library dialog.
Dimensions	Impostare la larghezza e l’altezza dell’elemento.
Material thickness	Set the depth and total passes. Select to enable a fixed first pass, maximum per pass, and a fixed last pass.
Direction	Set the direction as conventional or climbing.
Move control	Set the feed and plunge rate, and the spindle speed and dwell time.
Cleanup tab
Tool	Select a tool from the drop-down list. Click to launch the Tools Library dialog.
Dimensions	Set the amount.
Material thickness	Set the depth and total passes. Select to enable a fixed first pass, maximum per pass, and a fixed last pass.
Direction	Set the direction as conventional or climbing.
Move control	Set the feed and plunge rate, and the spindle speed and dwell time.
Bridge tab
Cut bridges	Select to cut bridges.
Tipo	Select tab, rectangular, triangular, or tab with lead-in. Select the check box to apply to cleanup the path.
Dimensions	Set the height and length.
Distribution	Set the quantity or distance.
Lead In/Out tab
Create lead in/out	Select to create a lead in/out.
Lead in/Lead out	Select Arc, Line, or On line, then set the radius, length, or angle.
Plunge type	Select the plunge type and set the cycle length, radius, slope, total length, and cycle number.
Overlap	Set the overlap.
Regola punto iniziale	Select to adjust the start point then select the start point from the diagram with a click.
Middle of longest segment	Select to start at the middle of the longest segment. The diagram is greyed out.
Fill Type tab
Style	Select a fill style. Depending on the option you choose, some of the fields below may not be available.
Overlap %	Set an overlap percentage.
Angolo	Set the angle.
Spacing	Set the spacing.
Variation	Set the variation.
Edge offset	Set the edge offset.
Uncentered, centered, random	Select one of the options.
Fill Tool tab
Tool	Select a tool from the drop-down list. Click to launch the Tools Library dialog.
Inlay	Select to enable an inlay and set the offset.
Material thickness	Set the depth, surface, and total passes. Select to enable a fixed first pass, maximum per pass, and a fixed last pass.
Direction	Set the direction as conventional or climbing.
Tool path cornering	Set the cornering as sharp corner or roll corner.
Move control	Set the feed and plunge rate, and the spindle speed and dwell time.
Fine Tool tab
Tool	Select a tool from the drop-down list. Click to launch the Tools Library dialog.
Material thickness	Set the depth and total passes. Select to enable a fixed first pass, maximum per pass, and a fixed last pass.
Direction	Set the direction as conventional or climbing.
Move control	Set the feed and plunge rate, and the spindle speed and dwell time.
3D Tool tab
Tool	Select a tool from the drop-down list. Click to launch the Tools Library dialog.
Centerline attributes	Set the corner threshold and select a precision level option.
Material thickness	Set the depth and total passes. Select to enable a fixed first pass, maximum per pass, and a fixed last pass.
Direction	Set the direction as conventional or climbing.
Move control	Set the feed and plunge rate, and the spindle speed and dwell time.
Bevel Tool tab
Tool	Select a tool from the drop-down list. Click to launch the Tools Library dialog.
3D sharpen corners	Select to enable.
Material thickness	Set the depth and total passes. Select to enable a fixed first pass, maximum per pass, and a fixed last pass.
Direction	Set the direction as conventional or climbing.
Tool path cornering	Set the cornering as sharp corner or roll corner.
Move control	Set the feed and plunge rate, and the spindle speed and dwell time.