Print and Cut with Registration Marks (RasterLink)

After completing your design in SignLab, when you are ready for output, follow the steps below.

  1. Go to File > Print and Cut.
  2. Select a queue or add a remote printing queue.
  3. Click Setup for more options.
    The job is sent to VPM.

Important!

  • Ensure you are using the same type of registration mark in both RasterLink and VPM.
  • Ensure you are using the same cutter.

In VPM:

With your printed job ready for cutting, select the job and click Cut Job in the toolbar.
The output should line up based on the registration marks.