Job tab

Select the correct print mode from the list.

A print mode is a configurable printing style based on a device, the ink, media, manufacturer, and resolution. For best quality, Fiery LLC recommends using default print modes.

Filtering Print Modes in a Queue

Click once to create a copy, twice to launch Modify step and repeat dialog.

When there is a copy, there are two options for quickly filling the roll media with copies:

• Copy By Area: Set the total roll width and length

• Copy By Units: Set the number of copy group rows or columns and total number of copies

Select pattern style, ratio, area fill or number of rows and columns, and X,Y spacing. Select to generate partial items.

Click Save or Load to save and load copy groups.

Note: Not available with Template media (change media type on the Media Setup tab).

Create a number of duplicates of a job that can be independently positioned and resized.

Select to generate clone or independent copy.

Opens the Easy Color Adjustments dialog.

Color Adjust

• Use the sliders to control lightness and darkness for hues, ink levels, brightness, saturation, and chroma.
• Select ICC Setting, Photo, or Graphics.

Processing Options

• When a white channel is available, set the maximum white ink %, choke, and strength.
• Set the highlight strength and switch layers (if applicable) to set the maximum ink coverage for the underbase, the choke (to limit the spread of the primer layer), and the strength.
• When a clear channel is available, set the maximum clear ink % and spread.

Special Effects with Ink Removal

• Inside/outside: Used for contouring the inside of objects (such as the letter "O")
• Bitmap frame: When selected, only the rectangular bitmap frame is contoured.
• Corner style: Point, round, or miter. If round is chosen, inside corners can also be rounded.
• Merge: With multiple objects, merge all contours into a single contour. Control the contour tightness with the slider. Corners are rounded.

Contour Cut